Amprobe IR-450 Instruções de Operação descarregar pdf (Página 12)

3. Not recommended for use in measuring shiny or

polished metal surfaces (stainless steel, aluminum,

etc.). See Emissivity.

4. Steam, dust, smoke, etc., can prevent accurate

measurement by obstructing the unit‘s optics

Emissivity

Most organic materials and painted or oxidized surfaces

have an emissivity of 0.95 (pre-set in the unit). Inaccurate

readings will result from measuring shiny or polished

metal surfaces. To compensate, cover the surface to be

measured with masking tape or ﬂat black paint. Allow

time for the tape to reach the same temperature as the

material underneath it. Measure the temperature of the

tape or painted surface.

SPECIFICATION

Temperature

Range

-30°C to 500°C (-22°F to 932°F)

Accuracy at

23°C ±2°C

<80﹪RH

-30°C to 0°C (-22°F to 32°F): ±2°C (±4°F)

1°C to 10°C (34°F to 50°F): ±1.5°C (±3°F)

11°C to 40°C (52°F to 104°F): ±1°C (±2°F)

41°C to 500°C (106°F to 932°F): ±1.5°C

(±3°F) or ±1.5% of reading, whichever

is greater.

Best display

Resolution

0.5°F / 0.2°C

Response

Time

0.5 s

Wavelength 630nm to 670nm

Spectral

Response

6.5µm to 18µm

Emissivity E=0.95

D:S 8:1(calculated at 80% energy)

1 2 ... 7 8 9 10 11 12 13 14 15

Sem comentários

Amprobe IR-450 Instruções de Operação Página 12