Amprobe TMA40 Airflow-Anemometer Manual do Utilizador descarregar pdf (Página 7)

ID: Press EDIT to enter the user id. Use the keypad to enter the information.5.

Note: To calculate air volume, ﬁrst enter the value of the air source area. Three choices are

available: length X width (rectangle); Diameter(Circle); and Area.

Range from 0~300cm (Rectangle and Circle and 0~90000sq.cm for area.

Single Measurement: MEAS (See Fig. 3)

Press F1 to enter the single measurement mode.•

Press F2 to select the type of input•

Press ESC to return to previous menu•

Multiple Measurement: MEM (See Fig. 4)

In this mode, you can manually record what you measure in real time and attach a ﬁle name

with the recording. There is a total of 99 memory locations in this mode.

Press F2 to enter the multiple measurement mode.•

Press F2(MEAS) to start a measurement.•

Press ABORT(F1) to cancel the measurement .•

Press SAVE(F4) to save the recording.•

Press F3(EDIT) to edit the ﬁle name of the recorded value. Use the keys to enter the name. •

Press and hold to move from one character to another. Release the key to select the desired

character.

Press CLR(F2) to delete a selected character.•

Press and hold CLR(F2) for over 2 seconds to delete the whole memory.•

Automatic Logging: LOG (See Fig. 5)

In this mode, you can automatically record what you have set up before a real time

measurement.

Press F3(LOG) to enter the LOG mode.•

Press SET(F3) to set up the parameters for the recording.•

Press •

keys to select a parameter.

Press EDIT to modify begin date, start time, End date, suspend time, and the rate ( 1 to 200 •

seconds).

Expect is 2400 points(total memory) and remain (remaining memory) will be calculated •

according to your setting.

Press NEXT•

Press START to begin the logging session•

Press VIEW to see the recording data•

Press MEAS to see the real time data measurement.•

Press ESC to return to previous screen.•

Press STOP to suspend the logging session.•

1 2 3 4 5 6 7 8 9 10 11 12 ... 73 74

Sem comentários

Amprobe TMA40 Airflow-Anemometer Manual do Utilizador Página 7